Installation Guide
Deployment, Extension & After Use
Barrier Orientation
Place the FlexWall at the chosen location and unroll it on the ground, ensuring there is sufficient distance from the structure it’s protecting. If repositioning is needed, it can be pulled by hand. However, moving long, connected sections is challenging and time-consuming, so it is advisable to carefully assess the deployment area in advance.
Unfold and Secure
Fully unfold the NoFloods FlexWall on the ground and secure the front flap by placing weights on it. This enhances stability and reduces the risk of seepage underneath the wall. For deployment on seepage prone surfaces or in windy conditions it is recommended to attach the NoFloods Weight Belt and/or the NoFloods Extension Membrane.
Extension of Barriers
To extend the FlexWall, connect two fully unfolded sections at the specially designed extension velcro strips visible at each end of the barrier. Ensure that the connection is made on dry land, as attempting to connect the walls in water can be problematic, especially if temperatures are below freezing. A level surface is required, particularly under the ends of the FlexWalls being joined.
After Use
When the water recedes and the FlexWall is no longer required, it is advisable to clean it with fresh water and allow it to dry before storage. To clean and dry the FlexWall, use the straps located every 1.50 meters along the bottom of the wall. Once the barrier is clean and completely dry, it can be folded and rolled up.